Image Shift - Konica Minolta 7055 Instruction Manual

Section 9 : Applications

Image Shift

Use Image shift to create a new binding margin on originals copied in the 1-1 or 2-2 mode,
or adjust existing margins on originals copied in the 1-2 or 2-1 mode. If image loss is likely,
select the Reduce & shift mode instead of regular Image shift.
Specifications for Image Shift
Use RADF.
RADF memory copy is available to store up to 1,500 pages (with maximum memory
fitted) unless memory overflow occurs.
Platen memory copy is available.
Shift amount of Shift mode: –99 ~ 250 mm in 1 mm increments
Shift amount of Reduce & shift mode: 1 ~ 250 mm in 1 mm increments
RADF APS detects size: A3, B4, F4, A4R, A4, B5R, B5, A5*
Platen APS detects size: A3, B4, F4, A4R, A4, B5R, B5, A5*
Paper size: A3, B4, F4, A4R, A4, B5R, B5, A5*
Incompatible Basic Copying Conditions with Shift mode: Group, Folding / Stapling &
Folding / Trimming with Booklet
Incompatible Basic Copying Conditions with Reduce & shift mode: Change magnification,
V/H zoom, APS, Group
Incompatible Original Scanning Conditions: Resolution (Very high), Mixed Original, Non
STD size
Incompatible Applications with Shift mode: Chapter, Booklet, OHP Interleave, Image
Insert, Dual Page, Program Job, Non-image Area Erase, Repeat, AUTO Layout
Incompatible Applications with Reduce & shift mode: Chapter, OHP Interleave, Image
Insert, Dual Page, Program Job, Non-image Area Erase, Repeat, AUTO Layout, Thin/
Thick Paper, Overlay
NOTE:
* 1 : A5 original is available in both landscape (
* 2 : A5 original is available in landscape orientation (
* 3 : A5 paper is available in landscape orientation (
1-1 mode
1
Originals
1-2 mode
1
9 - 48
4 4
3 3
2 2
1
Copies
1
3
4
3
2
Originals Copies
1
, 8.5"x11"
2
, 8.5"x11"R, 8.5"x11"
3
, 8.5"x11"R, 8.5"x11"
) and portrait ( ) orientation.
) only.
) only.
2-1 mode
3
1
Originals
2-2 mode
7
7
5
3
1
Originals
4
3
2
1
Copies
1
3
5
Copies