Konica Minolta 7055 Instruction Manual page 198

Job Store (continued)
5 When the Job No. Selection Screen is displayed, touch one of the keys numbered
from 1~15 to store the job under that number. Arrow keys can be used to scroll
through the 15 job numbers. The selected number key will be highlighted.
If you wish to cancel this selection, touch CANCEL to restore the Basic Screen,
which displays the settings for the job. If you wish to cancel the settings, press [ AUTO/
RESET ].
6 Touch OK on the Job No. Selection Screen to display the Job Name Registration
Screen.
If you do not wish to enter a name, touch OK .
The key displays [* * * * * *] in place of a name.
Job No. Selection Screen
7 Enter a job name in up to 6 characters, using the touch screen alphabet keypad.
To correct an entry, touch DELETE repeatedly to delete each character entered,
then enter the correct job name.
8 If the Job name is correct, touch OK to resume the Job No. Selection Screen.
To re-enter the Job name, touch CANCEL to return to the Job Name Registration
Screen.
9 When the Job No. Selection Screen is displayed, touch OK to complete the setting
and return to the Basic Screen.
NOTES:
1 A locked job is indicated by a lock icon (
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 [* * * * * *] displayed on a Job number key indicates that a job is stored but unnamed.
6 Job Memory entries can be recorded on the Job Memory Form included at the end of this
section.
Section 10 : Job Memory
Job Name Registration Screen
) on the Job key number.
Job Store
10
Job
Memory
10 - 3