Warnings And Cautions; Protect Your Investment; References - FLIR SR-100 PT Installation And Operation Manual

WARNINGS AND CAUTIONS

Warning! This guide uses the term Warning! to indicate a potentially hazardous situation,
which, if not avoided, may result in bodily harm or injury, damage to the camera, or other
property damage.

Protect Your Investment

The camera should be installed by a trained professional according to local codes and industry-
standard safe practices.
Proper ESD protocol should be followed while working inside the unit.
The camera is a precision optical instrument and should not be exposed to excessive shock or
vibration.
Avoid pointing the system directly at extremely high-intensity radiation sources, such as the sun,
lasers, arc welders, etc. This warning applies whether or not the system is powered.
Great care should be used with your camera's optics. They are delicate and can be damaged by
improper cleaning. Only clean the lens in the manner described in SR-Series user manual.

References

For additional information regarding installation of the SR camera, please refer to the SR-Series
Installation and Operation Manual (Document number 427-0014-00-10).
If you have a question regarding installation or operation of your SR-PT camera, contact FLIR
Systems, Inc Customer Support, using the contact information at the front of this manual. Check
out our training web site (http://www.flir.com/training/) to get information on courses offered and
to learn how you can become a FLIR-authorized Installer.
Take care during installation to avoid scratching the camera lens. Do not expose the camera to
direct sun for long periods without the sun shroud installed.
Important! All thermal imaging systems are subject to export control. Please contact FLIR
for export compliance information concerning your application or geographic area.
427-0027-01-10 Rev. 100 © 2009 FLIR Systems, Inc. Page 4 of 21