Mounting the SR-PT Camera
When installing the SR-PT system,
allow for sufficient clearance between
the top of the unit and overhead
obstructions.
This
interference when the enclosure is
driven to its maximum elevation.
Remove the transformer module from
the base of the system by loosening
the four Phillips crews and lifting the
module.
Attach the base of the system to the
included base plate
flathead 10-32 x 1/2-inch screws and
washers (supplied).
427-0027-01-10 Rev. 100
will
prevent
with the three
© 2009 FLIR Systems, Inc.
Page 14 of 21