Table of Contents
Advertisement
1
Camera Installation
This manual describes the installation and initial configuration of the FC-Series ID thermal camera.
If help is needed during the installation process, contact the local FLIR service representative or call
the appropriate support number listed at: http://www.flir.com/security/display/?id=71083.
All installers and integrators are encouraged to take advantage of the training offered by FLIR; visit
http://www.flir.com/training
This manual includes the following topics:
•
Installation overview
•
Mounting the camera and its components
•
Connecting the electronics
•
Bench testing the camera
•
Basic configuration and operation of the camera
•
Camera Specifications
For safety, and to achieve the highest levels of performance from the FC-Series ID camera system,
always follow the warnings and cautions in this manual when handling and operating the camera.
1.1
Warning!
If mounting the FC-Series ID camera on a pole, tower or any elevated location, use industry standard
safe practices to avoid injuries.
Caution!
Except as described in this manual, do not open the FC-Series ID camera for any reason. Damage
to the camera can occur as the result of careless handling or electrostatic discharge (ESD). Always
handle the camera with care to avoid damage to electrostatic-sensitive components.
Prior to making any connections, ensure the power supply or circuit breaker is switched off.
Be careful not to leave fingerprints on the FC-Series ID camera's infrared optics.
Operating the camera outside of the specified input voltage range or the specified operating
temperature range can cause permanent damage.
1.2
FLIR Doc # 427-00XX-YY-41 FC-Series ID Interconnect Document, available from the FLIR website,
provides further details regarding mechanical dimensions and mounting for the FC-Series ID camera.
FLIR Doc # 427-0030-00-28 Nexus IP Camera Configuration Guide, provides more information on
setting or changing camera parameters.
These documents are provided for reference only.
427-0089-00-12, Version 100
for more information.
Warnings and Cautions
References
July 2016
5
Advertisement
Table of Contents
