Table of Contents
Advertisement
3.5 Typical systems
Note: For information on how to connect the
product, refer to the
Chapter 4 Cables and
connections
section. For information on available
cables and accessories, refer to the
Spares and accessories
• Basic multifunction display (MFD) system:
You can connect the product directly to a
multifunction display using the supplied RJ45
coupler, and an additional adaptor cable (refer to
the
4.5 Network connection
you are connecting the product to an a, c, e, or
eS Series MFD, the camera requires a separate
power source, either connecting directly to your
vessel's 12 V dc power supply, or using a Power
over Ethernet (PoE) injector (refer to the
Power connection
section for details). If you are
connecting the product to a gS Series MFD,
the camera can be supplied PoE by the display,
provided the display has the necessary remaining
PoE allocation. Refer to the gS Series installation
and operation instructions for details on PoE
allocation, and also to the
section.
• Multiple camera system:
You can use a Raymarine network switch to
connect multiple cameras to a single MFD. Each
camera requires a separate power supply, unless
the switch is capable of providing PoE, or if the
camera is connected directly to a gS Series
MFD supplying PoE. Refer to the
connection
and
4.4 Power connection
for details.
• PC / laptop system:
You can connect the product to a PC or laptop
computer, directly via the computer's Ethernet
connector, or indirectly via a Raymarine network
switch. Refer to the
section for details. When connected to a PC or
laptop computer, you can access the product's
built-in web interface.
16
Chapter 11
section.
section for details). If
4.4
4.4 Power connection
4.5 Network
sections
4.5 Network connection
3.6 Warnings and cautions
Important: Before proceeding, ensure that you
have read and understood the warnings and
cautions provided in the
information
section of this document.
Chapter 1 Important
CAM220IP
Advertisement
Table of Contents
Troubleshooting
