HAMPTON BAY H15-LP1 Owners & Installation Manual page 33

8) Take the embers and place on the burner in the space between the
2 front logs, ensure not to cover any burner ports. Do not put embers
on the burner in the area between the front logs and the rear log.
See photo below.
Separate platinum embers and place at the front of the burner in
and around where the embers are placed. Avoid stacking platinum
embers.
A)
B)
®
Hampton H15-1 Direct Vent Freestanding Gas Stove
9) Place the center cross log on the locating pin in the top of the rear
log and position as shown below.
C)
10) Test fi re to ensure proper light off (make sure fl ame fl ows smoothly
from one end of burner to the other). If there is any fl ame hesitation,
check that area for any blockage of the burner ports.
11) Re-install the Glass Front, Cast Front and Top.
A)
D)
B)
INSTALLATION
Logs must be oriented as shown below.
A)
C)
D)
33