The Clock - AGA Legacy 44 User's Manual & Installation Instructions

The Clock

Setting the time of day
When the clock is first connected the display will
flash ( ) and (
To set the clock to read the time of day turn and
hold the Timer knob to the clock symbol (
and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Let
go of the Timer knob and it will spring back to
the vertical ( ) oven manual setting.
To time something that's cooking
(minute minder)
Turn the Timer knob to the right to the ( )
minute minder setting - it should click into
position. Use the adjustment knob to set the
time you need as below
You can turn the knob back to the ( ) manual
setting to keep an eye on the time of day or
leave it in the ( ) minute minder position as the
time ticks down.
Using your Range
To stop the beeper when it sounds
To stop automatically
) alternately.
)
To start and stop the oven
automatically (delayed baking)
13
Turn the Adjusting knob counter clockwise
Use when you have started the oven manually.
Turn the Timer knob to the (
the adjustment knob to set the time you need as
below.
'Stop Time' shows. AUTO will show in the
display. Turn the Timer knob to the (
setting. When your cooking is finished the
beeper sounds. Turn the Timer knob to the
vertical ( ) to return to manual cooking.
Before you set the clock, you must have two
numbers clearly in mind.
The 'cook time', which is the period of time you
want the oven to cook. The maximum cooking
time is 11 hours 59 minutes.
The 'stop time', which is the time of day you
want the oven to stop cooking. This must be
less than 12 hours from the current time.
You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.
Turn the Timer knob to the (
) position. Use
)
AUTO
) position.