Conversion To Propane Gas; Valve Adjustment - AGA Legacy 44 User's Manual & Installation Instructions

Read all instructions before installing or using this appliance.

Conversion to Propane gas

This conversion must be performed by a
competent person. After conversion the
installation must comply with the relevant
regulations and also the local electricity supply
company requirements. Read the instructions
before converting this appliance.
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and
lead to prosecution.
This instruction must be used in conjunction with
the rest of the appliance instruction, in particular
for information on Standards, range positioning,
connection hose suitability etc.
When servicing or replacing gas-carrying
components disconnect from gas before
commencing operation and check appliance is
gas sound after completion.
Do not use re-conditioned or unauthorised gas
controls.
Orifices
Standard burner
A orifice, B internal injector, C external injector
Remove burner caps and heads. Remove old
orifices. Fit new orifices. Reassemble in reverse
order.
Orifices
Natural Gas
Wok burner internal
external 166
Large Burner
Medium Burners
Small Burner
Installation Instructions
Wok burner
Propane Gas
110 internal 71
external 93
170 106
150 84
107 61
Save these instructions for future reference.

Valve adjustment

Pull off all the control knobs. If the hand rail has
been fitted remove it - remove the plastic
blanking plugs and remove the 2 end bracket
fixing screws.
Remove the 2 cross headed screws that were
hidden by the hand rail end brackets.
Open the oven door & or broiler door and
remove the fixing screws underneath the control
panel.
Lower control panel clear.
A valve bypass screw
Take out the bypass screw and replace with the
correct LP screw on each gas control.
Valve Bypass screws
Wok burner
Large Burner
Medium Burners
Small Burner
46
Natural Gas Propane Gas
82 49
70 38
53 31
43 22