Table of Contents
Advertisement
9
Position the back cover over the phone and gently press the two clasps
(a) located at the top corners. Then press the two clasps (b) halfway
down either side of the phone.
10
Slide out the keyboard (see
two clasps (c) at the bottom corners.
16
Chapter 2 : Basics
Slide out the
keyboard), and then press the
11
Press and hold the
power
your phone until you see a logo on the screen (approximately five
seconds). Please be patient while your phone starts up.
If your phone does not turn on after you insert the battery and press and hold
TIP
power, you need to connect your phone to the AC charger to charge it (see
Charge the
battery).
12
Follow the onscreen instructions to complete setup. To create a Palm
profile, enter a working email address and a password (see
Palm
profile?). Make a note of your password and keep it in a safe
place.
NOTE
If you have a Palm profile from an old webOS phone that you no longer
use, you can enter that profile email address and username to download that
profile information to your new phone. But if you are still using the other phone,
you must create a new Palm profile for your Palm
same profile on two phones.
IMPORTANT
If you see a notification that an update is available, tap
Now
to install it. Palm periodically sends updates to enhance the applications and
features on your phone.
Your phone is ready to use. To learn how to make your first call, see
calls.
Verify your profile
After you finish setup, look for an email on your computer at the address you
used for your Palm profile. Click the link in the email to do the following:
•
Verify your Palm profile.
button on the top right-hand corner of
What is a
Pre™ phone—you can't use the
®
Install
Make
Advertisement
Table of Contents
