Palm PRE User Manual page 130

Palm pre phone
Hide thumbs Also See for PRE:
Table of Contents

Advertisement

If the network you want is not displayed: Tap
enter the network name. Follow steps 4 to 7.
4
Tap the
Security
field and then tap the network type: Open,
WPA-personal, WEP, or Enterprise.
5
Tap Connect.
6
A series of different screens appears depending on the network type.
Enter or select the following if you are prompted to do so:
and/or
Password
and Certificate.
7
Tap
Sign
In.
Connect to a previously used network
If Wi-Fi is turned off: Turn on Wi-Fi (see
automatically attempts to connect to a previously used network, starting
with the most recently used network.
If Wi-Fi is turned on but you are not connected to a network: Your phone
automatically attempts to connect to a previously used network, starting
with the most recently used network.
130
Chapter 8 : Web and wireless connections
Join network
and
Username
Turn Wi-Fi
on/off). Your phone
If you are connected to one network and want to use a different one:
Open
Wi-Fi
. Tap another network name.
Disconnect from a network
When you disconnect from a network, you can keep it on your list of known
networks so that your phone can automatically connect to it again. If you
remove the network from your list of known networks, however, you must
reconnect to the network. Follow the steps in
network
or
Connect to a new secure network
again.
To disconnect from a network but keep it on your list of known networks:
Turn off Wi-Fi (see
Turn Wi-Fi
on/off). This disconnects from the network.
To disconnect from a network and remove it from your list of known
networks: Open
Wi-Fi
. Tap the network name and then tap
Network.
Customise connection settings
Do not change Wi-Fi settings unless you are having trouble connecting to a
network.
BEFORE YOU BEGIN
You must be connected to the network you want to
customise (see
Connect to a new open
network, or
Connect to a previously used
1
Open
Wi-Fi
.
2
Tap the network name.
3
In
Automatic IP
settings, tap
When Automatic IP Settings are on: The IP address is automatically
and dynamically configured.
When Automatic IP Settings are off: You can manually configure the
IP address.
Connect to a new open
to connect to the network
Forget
network,
Connect to a new secure
network).
On
or Off.

Advertisement

Table of Contents
loading

Table of Contents