Alt.set Mode - WayFinder V7000 Operation Manual

PROGRAMMING AND OPERATION
HEADER
3. Press to advance the first flashing
digit.
4. Press to select value.
The second digit from the left starts flashing.
When all 5 digits have been assigned values,
press to exit to normal display mode.

Alt.set mode

Please refer to the Frequently Asked
Questions section for altimeter reading.
To reset altitude back to the value set in
altitude mode, press
display to altitude, then do the following:
1. Hold
The set altitude value now displays on
line 3.
29
to toggle line 3
.