Step 2: Installing The 12-Volt Adapter - WayFinder V7000 Operation Manual

HEADER
INSTALLATION

Step 2: Installing the 12-volt adapter

Installing the 12-volt adapter is optional, but
highly recommended. Insert the small end
into the jack marked "POWER," located on
the back of the compass, and plug the large
end into your cigarette lighter receptacle.
The Wayfinder V7000 switches on
automatically when it senses the engine
is on. This feature is operational only
when the 12-volt adapter is used or the
optional hardwire kit is installed.
The photo sensor feature of the
Wayfinder V7000, which allows the
backlight to turn on automatically, is
operational only when the 12-volt
adapter is used or the optional hardwire
kit is installed.
Since cars do not always have constant
power supplied to the lighter receptacle,
you must keep a battery in the Wayfinder
V7000 at all times to allow the unit to
keep memory settings.
A 15-foot (4.5m) hardwire kit is
available at additional cost.See Optional
Accessories.
9