Timer Mode; Features; Steps To Use The Timer - WayFinder z250 Operation Manual

TIMER MODE

HEADER

Features

The timer is a standard counter that logs a
maximum of 99 hours, 59 minutes and 59
seconds, "99:59:59". The Wayfinder can be
used as a compass while still using the timer.
When counting, the timer starts at "00:00:00".
If the timer reaches its maximum, it resets to
"00:00:00" and begins to count up again. The
counter can be paused, and restarted at any
time.

Steps to use the timer :

1. Press the ADV button until "00:00:00"
is shown in the center of the compass
display.
2. Press the ENT button to start the timer.
3. Press the ENT button to pause the timer.
4. Press the ENT button to restart the timer
from the paused position. The timer
starts counting where it previously left
off.
5. Press and hold the ENT button from
the paused position to reset the timer to
zero.
15