Photo Sensor Feature - WayFinder V7000 Operation Manual

PROGRAMMING AND OPERATION
2 and " " in line 3.
SEC
2. Press
To advance through the values of 10, 30, 60,
180 and 00 seconds respectively.
3. Press .
To select value and exit to normal display
mode.
If the 12-volt adapter or optional
hardwire kit is installed, the photo
sensor feature disables the time value
for backlight shut-off.

Photo sensor feature

The Wayfinder V7000 comes equipped with
a photo sensor that turns the backlight on
or off depending on the amount of ambient
light it senses when the 12-volt adapter is
plugged in or the optional hardwire kit is
installed. The backlight turns on when the
unit senses darkness and turns off under the
following conditions:
• when the unit senses light again
• when
• when no magnetic field change has been
detected for approximately 10 minutes
22
is pressed