WayFinder V7000 Operation Manual page 26

PROGRAMMING AND OPERATION
3. Press .
To store selected digit in 100s position
and 10s digit flashes. Press
correct digit displays then press
to store. The 1s digit now flashes. Press
to advance digit until correct one
displays. Press
to exit.
The bearing value will display on line 1.
In bearing display mode, a flashing arrow
representing the stored bearing value will
appear on the compass rose if the direction
of travel differs from the stored bearing.
until
to store then press
To view a stored bearing
Press in normal display mode to toggle
between the various display options until the
bearing point value appears.
24