Altitude Mode - WayFinder V7000 Operation Manual

PROGRAMMING AND OPERATION

Altitude mode

Press in normal display mode to toggle
between the various display options until the
" indicator is on. The altitude
ALTITUDE"
appears numerically with an up/down trend
arrow, which indicates whether the altitude is
increasing or decreasing as you travel.
You must calibrate the altimeter from a
location with a known altitude, such as
your house, when the unit is used for
the first time in a vehicle. For optimum
performance, it is best to recalibrate as often
as possible (see Alt.set mode next page).
Press to toggle through the program-
ming options until "
on screen.
1. Press
" " (meters).
m
2. Press
Either "
_ _ _ _ _
displays in 5 digits on line 3 next to unit of
measure selection and the farthest left digit
starts flashing.
28
" and "
ALt SEt
to toggle between "
to store " " or "
ft m
" or the previous altitude
" display
" (feet) or
ft
."