Bearing Mode - WayFinder V7000 Operation Manual

PROGRAMMING AND OPERATION

Bearing Mode

Quick method of entering a bearing point
Press until "
bearing value appears in line 1.
1. Align your vehicle so the numeric heading to
be stored as a bearing point appears in line 2.
2. Hold to store bearing.
The bearing value will display on line 1. A
flashing arrow corresponding to the stored
bearing value will appear on the compass
rose display whenever the direction of travel
differs from the stored bearing.
To erase bearing point, see long method.
" or the last entered
b_ _ _ °
Long method of entering a bearing point
Press to toggle through the program-
ming options until "
on screen.
1. Press
Either "
_ _ _ °
value appears in line 1 with the 100s digit
flashing.
If
bearing point is erased.
2. Press
100s digit advances. Continue pressing until
correct digit displays.
23
" and "
bEAr SEt
.
" or the last entered bearing
is held now, the last entered
to enter a bearing point.
" display