WayFinder V7000 Operation Manual page 19

PROGRAMMING AND OPERATION
4. If you drive with your headlights and
stereo on, turn these on prior to
calibration.
Calibrating the unit
To begin calibration, press
through the programming options until
" " and " " display on screen.
CALIb SEt
1. Press .
"
PrESS StEP to StArt
If is pressed now, the unit returns to
normal display.
2. Press .
to toggle
" displays.
"
turn ONCE PrESS Ent to End
Turn vehicle in one complete circle in either
direction. Circle size does not matter. Take
at least 20 seconds to complete the circle.
3. Press
" " flashes once, and the unit returns to
dONE
normal display mode. If the degree symbol
on line 2 flashes after calibration, repeat
the calibration process. A flashing degree
symbol indicates magnetic distortion. See
the Frequently Asked Question section for
more information.
17
" displays.
.