Installing The Wayfinder; Installation Guidelines - WayFinder z250 Operation Manual

INSTALLING THE WAYFINDER

Installation guidelines

• Choose a place on the windshield that will
not obstruct the driver's view and is within
reach so the buttons are easy to push.
Make sure the windshield surface is clean.
Once installed, the face of the compass
must be pointing toward the rear of the
vehicle.
• The unit can be tilted up or down a
maximum of 20° from the horizontal
plane. If tilted more than ±20°, the
heading information after calibration
may not be accurate. The selected angle
from the horizontal plane must stay
fixed after calibration for the heading to
remain accurate (see illustration).
Dashboard
• The accuracy of the Wayfinder will be
diminished by a strong magnetic field,
such as that found in proximity to an
7
20° maximum up tilt
20° maximum down tilt