Table of Contents
Advertisement
4.11.6 Ping Utility
This page provides Ping Utility for users to ping remote device and check
whether the device is alive or not. Type Target IP address of the target device
and click on Start to start the ping. After few seconds, you can see the result in
the Result field.
4.11.7 CLI Commands of the Monitor and Diag
Command Lines of the Monitor and Diag configuration
Feature
MAC Address Table
Ageing Time
Add Static Unicast
MAC address
Command Line
Switch(config)# mac-address-table aging-time
350
mac-address-table aging-time set ok!
Note: 350 is the new ageing timeout value.
Switch(config)# mac-address-table static
0007.7c01.0101 vlan 1 interface fastethernet7
mac-address-table ucast static set ok!
Note: rule: mac-address-table static
117
Advertisement
Table of Contents
