User's Choice [5/6] - Minolta Di251 Manual

6

User's Choice [5/6]

1 Press the [UTILITY] button on the control panel.
The display will change.
On the touch screen, press the [USER'S CHOICE] key.
2
The display will change.
3 Press [5/6].
Intelligent Sorting
Specify whether the "Sorting" function should be activated when at least
two originals are placed in the document feeder.
Select the desired setting.
Ü
The default setting is [ON].
Output Tray
Specify the preferred output tray to which the copier delivers copies if the
copier is equipped with a finisher. The available options depend on the
equipment attached to your copier.
Select the desired setting.
Ü
The default setting is:
for sorter
for finisher
for mailbin finisher
Small Originals
Specify whether a copy cycle is to be started when [START] is touched
even if an original is not detected on the original glass or the detected
original is too small.
Press [ON] if a copy cycle should be started.
Ü
or
Press [OFF] if a copy cycle should not be started. In this case, a
warning message prompting the user to select the paper size
manually will appear.
The default setting is [ON].
6-12
PC [1] and copier [2].
PC [2]
PC [2]
Utility
Di251/Di351