6
User's Choice [2/6]
1
Press the [UTILITY] button on the control panel.
The display will change.
On the touch screen, press the [USER'S CHOICE] key.
2
The display will change.
3
Press [2/6].
Original > Copy Default
Specify the Copy Mode to be enabled by default when the copier is
switched on or reset.
Select the desired Copy Mode.
Ü
The default setting is "1-sided>1-sided".
If the default setting is set to 1-sided>2-sided or 2-sided>2-sided, an
additional button appears on the touch screen. This key allows you to
switch back quickly to 1-sided>1-sided mode.
Auto Paper/Auto Size
Specify the Copy Mode to be enabled by default when the copier is
switched on or reset.
Select [AUTO PAPER], [AUTO SIZE] or [MANUAL].
Ü
The default is [AUTO SIZE].
6-6
Utility
Di251/Di351