Minolta Di251 Manual page 151

Customizing Your Copy
5 Set the file margin width of the
originals.
Confirm your settings with [ENTER].
6
The Original>Copy settings are
shown again.
If necessary, make additional copier settings. Start the copy cycle by
Ü
touching [START].
Combining file margin settings!
Settings: file margin left,
file margin width 0 mm
Result:
The 2nd original will be printed in
the same direction as the
1st original.
Settings: file margin above,
file margin width 0 mm
Result:
The 2nd original will be printed in
the opposite direction to the
1st original.
Di251/Di351
4
4-49