To Load Paper Into The Manual Bypass Tray - Minolta CF1501 Manual

4

To load paper into the manual bypass tray

Paper can be fed manually through the manual bypass tray if you wish to
copy onto paper that is not loaded into a drawer or if you wish to copy onto
special paper, such as overhead transparencies, postcards, or thick paper
1 or 2.
1
Open the manual bypass tray.
2
Adjust the paper guides to the size
of the paper, and then load the
paper so that the front side of the
paper (the side facing up when the
package was unwrapped) faces
down. Lightly slide the paper into
the feed slot as much as possible so
that it is ready to be fed into the
copier.
? Do you need more information
on feeding paper through the manual bypass tray?
➜ Feed only one sheet of paper at a time.
➜ Copies will be made on the surface of the paper facing down when
it is loaded into the manual bypass tray.
4-16
Copy Paper
CF1501/CF2001