Minolta CF1501 Manual page 194

9
❍
Check that the top margin of the
printed test pattern is 5.0 mm.
❍
If the top margin is not as
specified, touch
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting a
higher negative number makes
the margin narrower.
❍ Repeat step 2 until the top margin
meets its specification.
? Do you wish to make this
adjustment for other types of
paper?
➜ Load the appropriate paper into
the multipurpose paper drawer (1st drawer), change the paper
type dial to the appropriate paper setting, and then perform step 2.
3
In the Expert User's Mode screen, touch [Exit].
4
In the Administrator Mode screen, touch [Exit].
5
In the Utility screen, touch [Exit].
9-26
Administrator Mode Operations
and to
a
a: 5.0 mm ± 1.0 mm
CF1501/CF2001