To Make Settings For Single- Or Double-Sided Documents And Copies - Minolta CF1501 Manual

7

To make settings for single- or double-sided documents and copies

1
Position the document(s) to be copied. (Refer to page 5-1 for more
details.)
2
Select the desired color mode. (Refer to page 3-19 for more details.)
3
Touch [Orig. Ö Copy].
The Orig. Ö Copy screen appears.
4
Select the type of document that is
to be copied and the desired type of
copy.
❍ If the optional memory (M128-2)
is not installed, the screen
shown at the right appears.
Select the type of document that
is to be copied.
? When is [Compress Mode]
touched?
➜ If [Compress Mode] is touched,
[Color] (image quality priority) is
set as the default. If the memory
is not installed, touch [Compress] to prevent errors. (Refer to
page 10-45.) Since copy quality will decrease when Compress
Mode is changed, the setting should normally not be changed.
5
Specify any other necessary settings.
6
Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
7-4
Advanced Operations
CF1501/CF2001