Making Copies
Using the Manual Bypass Tray
1
Place the original on the Original
Glass and make the control panel
settings.
2
Insert the copy paper into the Manual Bypass Tray.
This automatically starts the copy cycle.
NOTES
è
Insert the copy paper one sheet at a time.
è
Do not insert a sheet of paper while the copier is warming up or in a
multi-copy cycle.
è
The Auto Size Mode and Book Copying Mode cannot be selected for
manual bypass copying.
Using the Multi Bypass Tray (Option)
1
Place the original on the Original Glass and make the control panel
settings.
2
Swing down the Multi Bypass Tray
and slide the Paper Guide Plate to
the size of the copy paper.
NOTE
è
Pull out the Multi Bypass Tray Extender if you are using larger paper.
EP1085
3
3-23