Table of Contents
Advertisement
Distinctive Ring
Speed access no. 67
Some telephone carriers offer a service called Distinctive Ring.
Distinctive Ring lets you have different numbers on one line,
each with its own distinctive ring. You can then use one
number exclusively as a fax number without the expense of a
second line. Your local telephone carrier can provide you with
more information about this service, which usually has an
additional charge.
Available settings are:
OFF (not detected)
ON (detected)
SET (programmed)
The default setting is OFF.
|
180
KONICA FAX 9880/9980
!
You must have your local telephone carrier's Distinctive
Ring service.
!
Your fax machine must be in FAX, MEM, or PC answer
mode.
!
Other modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
!
This feature may not work properly if you have a
telephone other than a genuine Konica optional
handset connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring pattern:
1
Press the Menu/Exit key to enter the menu.
2
Enter speed access number 67.
3
When the display shows the parameter you want, press
or
to select the setting. Press Enter.
4
Press Menu/Exit to return to standby mode.
Advertisement
Table of Contents
