Selecting The Density - Kyocera KM-2560 Operation Manual

FAX Operation (Basic)
3-8
1
To change the
resolution,
press [Color/
Image], and
then [Scan
Resolution].
NOTE:
You can see a preview of the image to be sent by pressing
[Preview]. For details, refer to Previewing Images on page 3-33.
2
Select the
resolution.
3
Press [OK].
IMPORTANT:
• If you select a high resolution, the image becomes clearer. However,
the higher the resolution is, the longer the send time is.
• When you send originals at a resolution of 200 × 400 dpi (Super Fine)
or higher, the fax machine on the receiving system needs to be
capable of receiving the originals at such image quality. When the
receiving system does not have such capability, originals are sent at
an image quality of 200 × 200 dpi (Fine).

Selecting the Density

6
Adjusting the density when scanning originals
• Manual (-3 to +3): You can adjust the density using seven levels or 13
levels.
• Auto: The optimal density is chosen according to the density of the
originals.
Ready to send.
Sending Image
Density
Sharpness
Original : Letter
Zoom : 100%
Send : Letter
Change Setting
Destination Quick Setup Type of Original/
Transmission
Status
Ready to send.
Scan Resolution
Select fineness of scanning resolution.
The larger the number, the better the
image resolution.
Press [OK] to display
the image.
600x600dpi
200x400dpi
Super Fine
Add Shortcut
Status
Destination
Original Scan Color
Image Resolution Selection
Background
Density Adj.
Color/Image Advanced
Setup
10/10/2007 10:00
Destination
400x400dpi 300x300dpi
Ultra Fine
200x200dpi 200x100dpi
Fine Normal
Cancel OK
10/10/2007 10:00
OPERATION GUIDE
1
1