Registering Permit Fax No - Kyocera KM-2560 Operation Manual

Reception
Restrictions
†.
††.
Reception
Rejection
†.

Registering Permit FAX No.

OPERATION GUIDE
Prerequisites
• Register Permitted FAX
numbers or Permitted ID
††
numbers.
Registering Permit FAX No. on
page 6-17 or Registering
Permit ID No. on page 6-21.)
• Reception restriction settings
are specified in [Permit List +
Address Book] in Reception
Restrictions. (Refer to Setting
Reception Restriction on
page 6-24.)
• Register the Local FAX
Numbers or Local FAX IDs of
other parties.
If there is neither a Permitted FAX No. nor a Permitted ID No. registered for the recipient,
sending is not rejected.
If there is neither a Permitted FAX No. nor a Permitted ID No. registered for the sender,
reception is not rejected.
Prerequisites
• Register Reject FAX
†
numbers. (Refer to
Registering Reject FAX No. on
page 6-19.)
• Reception restriction settings
are specified in [Reject List] in
Reception Restrictions. (Refer
to Setting Reception
Restriction on page 6-24.)
If there are no Reject FAX numbers registered, calls are only rejected from senders
whose Local FAX Numbers (Indicates local FAX information entries, not the actual line
numbers.) are not registered.
NOTE:
Up to 50 Permit FAX numbers can be registered.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of TX/RX Restriction and then [Register/Edit] of
Permit No. List.
Communication Establishing
• The sender's Local FAX
Number matches a Permitted
(Refer to FAX No. registered on the
machine.
• The sender's Local FAX ID
matches a Permitted ID
registered on the machine.
• A fax number that matches the
last 20 digits of the sender's
Local FAX Number is
registered in the Address Book
on this machine.
• The sender's Local FAX
Number is not registered.
• The sender's Local Fax
Number matches a Reject
FAX No. registered on the
machine.
Setup and Registration
Requirements
Reception Rejection
Requirements
6-17
6