Registering An Encryption Key - Kyocera KM-2560 Operation Manual

Registering an Encryption Key

OPERATION GUIDE
NOTE:
Set the same characters for the numbers indicated by the same
letter in parentheses. For example, the same characters should be used
as the encryption key (C) in both the sending and receiving systems.
An encryption key is required when registering the Address Book used for
encryption communication (the other party is directly entered using the
numeric keys) in the sending system and when setting encryption in the
receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from
A to F are arranged to form 16 numbers and/or letters arbitrarily. The
encryption key created is registered by adding a 2-digit key number from
01 to 20.
NOTE:
Up to 20 encryption keys can be registered.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of TX/RX Common and then [Register/Edit] of
Encrypt. Key Registration.
3
Select the
unregistered
encryption key and
press [Register/
Edit].
4
Press [Encryption
Key].
5
Use the numbers (0 to 9) and the alphabet (A to F) on the touch panel to
enter the encryption key (16 digits) and press [OK].
FAX - Encrypt . Key Registration
Register a key to use for encrypted FAX transmissions . (Up to 20 keys can be registered.)
Encryption Key
Key01
Key02
Key03
Key04
Key05
Status
FAX - Add
Register or modify encryption key.
Enter 16 characters using the numbers 0-9 and the letters A-F.
Encryption Key
Status
Setup and Registration
1/4
Register
/Edit
Delete
Close
10/10/2007 10:00
Cancel OK
10/10/2007 10:00
6-27
6