Automatic Send; Direct Transmission - Kyocera KM-2560 Operation Manual

FAX Operation (Basic)

Automatic Send

3-2
General transmission using the numeric keys is explained.
NOTE:
To send an Internet fax (i-FAX), refer to i-FAX Transmission on
page 8-10.
Switching to the Send Screen
1
Check that the basic
send screen is
displayed on the
touch panel. (Refer
to page 1-7.)
If the basic send
screen is not
displayed, press the
Send/FAX key.
Selection of Transmission Method
2
There are two transmission methods - memory transmission and direct
transmission. The default is memory transmission.
To select direct transmission, use the following procedure.
1
Press
[Advanced
Setup], and
then [FAX
Direct
Transmission].
Ready to send.
Enter Destination.
Destination
On Hook Chain Detail /Edit
001 002 003
Free
A OFFICE
006 007 008
Type of Original/
Destination Quick Setup
Status
30/40/50 ppm model
Ready to send.
Enter Destination.
Sending Image
Border Erase
Set Original.
Centering
Original : ---
Zoom : 100%
Send : ---
Preview
Type of Original/
Destination Quick Setup
Transmission
Status
Destination
Detail
Address Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
004 005 No.
i-FAX
Addr Entry
009 010
1/10
Color/Image Advanced
Transmission Setup
10/10/2007 10:00
25/30 ppm model
Destination
Zoom Job Finish FAX Delayed
Notice Transmission
File Name Continuous E-mail
Entry Scan Subject / Body
FAX Direct FAX Send and
Transmission Polling RX Print
1/2
Advanced
Color/Image
Setup
10/10/2007 10:00
OPERATION GUIDE
0
0