Receiving Mode - Kyocera KM-2560 Operation Manual

Setup and Registration

Receiving Mode

6-10
The following five receiving modes are available.
• FAX Automatic Reception [Auto (Normal)]
• FAX/TEL Auto Switch Reception [Auto (FAX/TEL)] (Refer to page 6-4.)
• FAX/Answering Machine Auto Switch Reception [Auto (TAD)] (Refer to
page 6-4.)
• DRD Reception [Auto (DRD)] (Refer to page 6-14.)
• Manual Reception [Manual] (Refer to page 4-12.)
Select the mode appropriate for the way the machine is used.
NOTE:
DRD reception mode is available only for inch models.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Reception, [Next] of FAX and then [Change]
of RX Setting.
3
Select the reception mode to be changed.
When [Auto (DRD)] is selected, choose the pattern of ringing.
Pattern
Pattern 1
Pattern 2
Pattern 3
Pattern 4
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Description
Normal Ring
Double Ring
Short-Short-Long
Short-Long-Short
OPERATION GUIDE