Registering An Encryption Key - Kyocera TASKalfa 250ci Operation Manual

Registering an Encryption Key

An encryption key is required when registering the Address Book used for encryption communication (the other
party is directly entered using the numeric keys) in the sending system and when setting encryption in the
receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from A to F are arranged to form 16
numbers and/or letters arbitrarily.
NOTE:
Up to 20 encryption keys can be registered.
FAX - Encrypt. Key Registration
Register a key to use for encrypted FAX transmissions.
(Up to 20 keys can be registered.)
Encryption Key
Key01
Key02
Key03
Key04
Key05
Status
Encryption Key:
Register or modify encryption key.
Enter 16 characters using the numbers 0-9 and the letters A-F.
Encryption Key
Status
OPERATION GUIDE
Register
/Edit
Delete
Close
10/10/2008 10:10
Cancel OK
10/10/2008 10:10
1
Press the System Menu key.
2
Press [FAX], [Next] of TX/RX Common and then
[Register/Edit] of Encrypt. Key Registration.
3
Select the unregistered encryption key and press
[Register/Edit].
4
Press [Encryption Key].
5
Use the numbers (0 to 9) and the alphabet (A to F)
on the touch panel to enter the encryption key (16
digits) and press [OK].
6
Press [OK]. To register other encryption keys,
repeat steps 3 to 6.
Setup and Registration
6-25
6