Table of Contents
Advertisement
3
Open the front cover to the copier.
4
Turn the green fixing knob in the direction of the arrow shown
in the illustration. Remove the jammed paper once it is
ejected.
5
Push the green release lever down to the left.
6
Turn the green conveyor knob in the direction of the arrow
shown in the illustration. The paper will be transported to the
paper conveyor unit.
Section 9 TROUBLESHOOTING
7
Pull the paper conveyor unit out slowly. Remove any jammed
paper.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
8
Open the cover to the fixing unit.
CAUTION
The copier's fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.
9-15
Advertisement
Table of Contents
