Kyocera Mita KM-7530 Operation Manual page 174

Section 7 COPIER MANAGEMENT FUNCTIONS
● Changing the management code
Perform the following procedure to change the management code
used by the copy manager.
IMPORTANT!
If you change the management code from its factory default, be sure
to keep some sort of record of the new management code. If, for any
reason, you forget the registered management code, you will need to
contact your service representative.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2
Select "Management code change" ["Change MGMT code
with #"] in the settings list on the left side of the touch panel
and then touch the "Change #" key.
The "Management code change" ["Change MGMT code with
#"] screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Silent mode
Date/Time
Time difference
Management code change
Auto shut-off
Default setting
Metric specifications
Default setting
Machine default
Default menu
Silent mode
Date/Time
Time difference
Change MGMT code with #
Auto shut-off
Default setting
7-34
Language Management
Bypass BOX
setting Management
Print
report
Language Management
Bypass
Hard Disk
setting Management
Print
report
Setting mode
Off
2001/10/30 14:02
GMT+08:00
6300
On
Change #
Setting mode
Off
30/10/'01 14:02
GMT+08:00
6300
On Change #
3 Use the keypad to enter a new 4-digit management code.
Inch specifications
Management code change
Default setting - Machine default
Metric specifications
Change MGMT code with #
Default setting - Machine default
End
NOTE
Weekly
timer
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
End
Week
5 Touch the "Close" key once again. The touch panel will return
timer
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
A bl e t o c h a n g e m a n a g e m e n t c o d e. ( # key )
A bl e t o c h a n g e m a n a g e m e n t c o d e. ( # key )
Back Close
Back Close