Kyocera Mita KM-7530 Operation Manual page 159

Default setting
Paper type Sets and then displays the type of paper that is loaded in
(drawer[cassette] No.1 - drawers[cassettes] No.1 through No.4.
No. 4) * The drawer[cassette] No.4 setting will only be
displayed when the optional Side Feeder is installed on
your copier.
Custom paper type for Sets whether or not each custom paper type (custom 1 –
2-sided copying custom 8) will be available for use in
2-sided copying.
Paper type (for used Sets whether or not used paper will be available for use
paper) with each custom paper type (custom 1 – custom 8).
Auto shut-off time Sets the amount of time that will elapse after copying, or
if no operation is performed, before the auto shut-off
function engages and turns the copier OFF.
* It is recommended that you try to set a longer time
interval before auto shut-off engages if you use the
copier frequently, and to a shorter time if there are long
intervals between use.
Auto preheat time Sets the amount of time between the point that copying
ends and the energy-saving preheat mode engages.
Section 7 COPIER MANAGEMENT FUNCTIONS
Description Available Factory
settings setting
Plain Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
On / Off On
On / Off Off
15 – 240 (minutes) 90 (minutes)
1 – 45, 60, 90, 120, 15 (minutes)
180 and 240
(minutes)
Reference
page
7-24
7-25
7-26
7-27
7-28
7-19