Table of Contents
Advertisement
(5) Accessing the copy default settings
Perform the following procedure when you want to access the
screens for each of the various copy default settings.
1
With the content of the "Basic" tab displayed, press the [ ]
key. The "Default setting" screen will be displayed.
2
Touch the "Copy default" key on the left side of the touch
panel.
Inch specifications
Default setting
Default setting
Copy
default
Machine
Document
default
Management
Metric specifications
Default setting
Default setting
Copy
default
Machine
Document
default
Management
3
Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is "6300" and
for 75 cpm copiers is "7500".
Inch specifications
Enter the administrator number
Metric specifications
Enter the administrator number
End
Weekly
Language
Management
timer
Bypass
BOX
setting
Management
Print
report
End
Week
Language
Management
timer
Bypass
Hard Disk
setting
Management
Print
report
Close
Close
Section 7 COPIER MANAGEMENT FUNCTIONS
4
If the entered code matched the registered one, the "Copy
default" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Exposure mode
Exposure steps
Original image quality
Original size (custom1)
Original size (custom2)
Default setting
Metric specifications
Default setting
Copy default
Default menu
Exposure mode
Exposure steps
Image quality original
Original size (custom1)
Original size (custom2)
Default setting
NOTES
• It is possible for you to change the 4-digit management code.
(See "Changing the management code" on page 7-34.)
• Refer to the desired procedure(s) explained under "(6) Making copy
default settings" and perform the corresponding setting(s).
Setting mode
Manual
1 step
Text + Photo
11
/
9
/
11
x16
16
16
11
11
/
x16
9
/
Change #
16
16
Setting mode
Manual
1 step
Text + Photo
Off
Change #
Off
Close
Up
Down
Close
Up
Down
7-39
Advertisement
Table of Contents
