Kyocera Mita KM-7530 Operation Manual page 204

Section 7 COPIER MANAGEMENT FUNCTIONS
● Customize screen layout (Main functions)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the "Basic" and the "User
choice" tabs in order to make the display more appropriate to the way
you use the copier.
1 Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-39.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Customize(Main function)" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Customize(Main function)" screen will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Modify Copy
Job Queue Report
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting
Copy default
Default menu
Modify copy
Job Queue Report
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
7-64
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
Language Management
Bypass
Hard Disk
setting
Management
Print
report
Setting mode
On / Off
On(All job)
On
Change #
Setting mode
On / Off
On(All jobs)
On
Change #
3 If you want to change the order of the basic functions and
modes, touch the "▲" or the "▼" cursor key to select the item
you want to move. Then touch the "Move ahead" key or the
"Move behind" ["Move backward"] key to move that item and
change the order of display. The final display of the basic
functions and modes will be in accordance with the numbers
in the list and those shown in the tabs to the left of that list.
Inch specifications
Customize(Main function)
Basic
End
User choice
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Customize(Main function)
Basic
End User choice
Week
timer
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
5 Touch the "Close" key once again. The touch panel will return
Up
to the "Default setting" screen.
Down
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Back Close
Register mode
Reduce/Enlarge Move
Ahead
Sort/Finish
Move
1/2 sided
Behind
Orig. quality
Original size
Back Close
Register mode
Reduce/Enlarge Move
ahead
Sort/Finish
Move
1/2 sided
backward
Quality orig
Original size