Table of Contents
Advertisement
Section 7 COPIER MANAGEMENT FUNCTIONS
● Auto preheat time
Perform the following procedure to set the amount of time between
the point that copying ends and the energy-saving preheat mode
engages.
1
Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine
Document
default
Management
Metric specifications
Default setting
Default setting
Copy
default
Machine
Document
default
Management
2
Select "Auto preheat time" in the settings list on the left side
of the touch panel and then touch the "Change #" key.
The "Auto preheat time" screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Auto preheat time
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Default setting
Metric specifications
Default setting
Machine default
Default menu
Auto preheat time
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Default setting
7-28
Language
Management
Bypass
BOX
setting
Management
Print
report
Language
Management
Bypass
Hard Disk
setting
Management
Print
report
Setting mode
15 Minute
On
Off
30/10/'01 14:02
GMT+08:00
Change #
Setting mode
15Minute
On
Off
25 / 10 / '01 14:02
Change #
GMT+00:00
3
Touch the "+" key or the "–" key to change the displayed time
to that desired (any available setting between 1 minute and
240 minutes).
Inch specifications
Auto preheat time
Default setting - Machine default
End
Metric specifications
Weekly
timer
Auto preheat time
Default setting - Machine default
End
Week
timer
NOTES
• The setting can be made to any 1-minute increment between 1
minute and 45 minutes, 60 minutes, 90 minutes, 120 minutes, 180
minutes or 240 minutes.
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
Close
5
Touch the "Close" key once again. The touch panel will return
Up
to the "Default setting" screen.
Down
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
S e l e c t a u t o p r e h e a t t i m e l a s t s e t t i n g
o r w h e n c o py i n g i s d o n e.
M i nu t e
+
–
Set the time for auto preheat mode after last setting,
or when copying is done.
Minute
Back
Close
Back
Close
Advertisement
Table of Contents
