Kyocera Mita KM-7530 Operation Manual page 169

● Copy eject location
Perform the following procedure to set where finished copies will be
ejected.
NOTE
This setting will only be displayed when the optional Document
Finisher or Multi Job Tray is installed on your copier.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
2 Select "Select Copy output mode" in the settings list on the
left side of the touch panel and then touch the "Change #"
key.
The "Select Copy output mode" screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Auto shut-off time
Auto preheat time
Select Copy output mode
Key sound ON/OFF
Silent mode
Default setting
Metric specifications
Default setting
Machine default
Default menu
Auto shut-off time
Auto preheat time
Select COPY output mode
Key sound ON/OFF
Silent mode
Default setting
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
report
Language Management
Bypass
Hard Disk
setting Management
Print
report
Setting mode
90 Minute
15 Minute
Tray A
On
Off Change #
Setting mode
90Minute
15Minute
Tray A
On
Change #
Off
Section 7 COPIER MANAGEMENT FUNCTIONS
3 Touch the key that corresponds to the desired location.
Inch specifications
Select Copy output mode
Default setting - Machine default
Metric specifications
Select COPY output mode
End
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
End
4 Touch the "Close" key. The touch panel will return to the
Week
timer
screen in step 2.
5
Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Up
Down
Close
Up
Down
Set the default copy output destination
Tray 3
Tray A
Tray 1 Tray 4
Tray 2 Tray 5
Set the default copy output destination.
Tray 3
Tray A
Tray 4
Tray 1
Tray 2 Tray 5
Back Close
Back Close
7-29