Table of Contents
Advertisement
2
Open the lower right cover to the copier.
3
Remove any jammed paper without tearing it.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
4
Close the lower right cover to the copier.
5
If necessary, reconnect the Side Feeder to the copier.
Section 9 TROUBLESHOOTING
• Misfeed in the multi-bypass tray
If the message below is displayed, a misfeed has occurred in multi-
bypass tray. Perform the following procedure to remove the jammed
paper.
Inch specification
Paper misfeed.
JAM 00
Metric specification
Paper misfeed.
JAM 00
1
Remove all of the paper remaining in the multi-bypass tray.
* If the paper is difficult to remove, do not attempt to force it.
Instead, refer to "2 Misfeed in the paper conveyor section"
on page 9-13 in order to remove the jammed paper.
2
Reset the paper in the multi-bypass tray.
1.Remove paper from Multi purpose tray.
1.Remove paper from multi purpose tray.
9-11
Advertisement
Table of Contents
