Problems When Sending A Fax; Problems When Receiving A Fax - Konica Minolta Minoltafax 1100 User Manual

9
9.2

Problems when sending a fax

Problem description
Fax transmission is not possible.
9.3

Problems when receiving a fax

Problem description
Despite calling signal, it is not
possible to receive a fax.
It is not possible to receive a fax.
The print-out is very pale.
The print-out is blank.
The fax print-out contains illegible or
warped letters.
The fax print-out contains
blank lines or spots.
9-2
Possible cause / solution
The document has not been drawn
into the machine.
The receiving fax machine is not
ready to receive.
The receiving fax machine is been
programmed for manual reception.
Possible cause / solution
Your fax machine is set for manual
reception. List up the telephone
handset and press the [START] key.
The power plug is not correctly
inserted.
There is no paper in the paper
holder.
Selective reception has been
activated. Check setting of software
switch 26.
The ink cartridge is almost empty.
Install a new ink cartridge.
The ink cartridge is totally empty.
Install a new ink cartridge.
The ink cartridge is not correctly
installed.
The protection tapes were not fully
removed from the ink cartridge.
The document was placed upside
down in the sending fax machine.
The telephone line is of poor quality.
If this problem frequently occurs,
inform your local service centre.
The ink cartridge is not correctly
installed.
MF 1100
Trouble-shooting
See
Page 4-3
–
–
See
Page 5-2
Page 2-7
Page 2-11
Page 5-4
Page 9-6
Page 9-6
Page 9-6
Page 9-6
–
Page 4-17
Page 9-6
Rev. 1.1.1/07.06.99