Technical Specifications - HP Integrity rx2660 Quickspecs

QuickSpecs

Technical Specifications

Server model number Server model number Server model number Server model number
Server product numbers Server product numbers Server product numbers Server product numbers 2 processor/4 core capable HP Integrity rx2660 server base system with two 2 processor/4 core capable HP Integrity rx2660 server base system with two 2 processor/4 core capable HP Integrity rx2660 server base system with two 2 processor/4 core capable HP Integrity rx2660 server base system with two
processor modules: processor modules: processor modules: processor modules:
Configure with two 1.6 GHz/12 MB single core 9110N processor modules
Configure with two 1.42 GHz/12 MB dual core 9120N processor modules
Configure with two 1.66 GHz/18 MB dual core 9140M processor modules
In addition to two processor modules, the base system includes one power supply
(second supply can be added for redundancy-AD254A), 2×10/100/1000 GbE ports
(supports Wake On LAN), and 8 port SAS controller. Must select I/O backplane (1
maximum)and a minimum of 2 GB memory. Disk drive must be added for a
complete hardware solution.
OFS - Configure with two 1.6 GHz/12 MB single core 9110N processor modules
OFS - Configure with two 1.42 GHz/12 MB dual core 9120N processor modules
OFS - Configure with two 1.66 GHz/18 MB dual core 9140M processor modules
Server From Factor (Required - Must choose either Factory Rack Integration or Field Server From Factor Server From Factor Server From Factor
Rack Kit)
Please refer to the HP 10000 Series G2 Rack Best Practices Guide for information on
rack deployment, stabilization and transportation
(http://www.HP.com/go/rackandpower)
Universal Rack Kit Universal Rack Kit Universal Rack Kit Universal Rack Kit
Field Rack Kit Field Rack Kit Field Rack Kit Field Rack Kit
Includes rails and cable management arm.
Factory Rack Integration Factory Rack Integration Factory Rack Integration Factory Rack Integration
For factory rack integration, a rack cabinet must appear in the same section of the
order. The slides and cable management arm will be installed with the server in the
rack cabinet when factory rack integration is ordered.
Pedestal Kit
Racking Support Shelf Kit. Required for all factory racked orders. One shelf kit is
needed for every 10 servers in the rack and one for every gap left between servers.
NOTE: If the N+1 power supply is ordered standalone the power supply will ship with two cords;; one NOTE: NOTE: NOTE:
connects the system to the rack PDU and one enables connection to a wall socket. The cord that
connects the system power supply to the PDU has an IEC 13 end, which plugs into the system power
supply's IEC 14 socket, and an IEC 14 end, which plugs into the PDU's IEC 13 socket. The localized
cord that connects the system power supply directly to the wall socket has an IEC 13 end, which plugs
into the system power supply's IEC 14 socket, and a country specific end, which plus into the wall socket.
This localized cord is included at the distribution site.
If the N+1 power supply is ordered with the server, the additional cords will be included.
DA - 12698 Worldwide — Version 30 — April 13, 2012
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
rx2660
AH235A AH235A AH235A AH235A
001
002
003
004
005
006
AD253A
B01
B01
AD251A
AB469A
Page 19