Technical Specifications - HP ProLiant ML110 Generation 5 Quickspecs

Hide thumbs Also See for ProLiant ML110 Generation 5:
Table of Contents

Advertisement

QuickSpecs

Technical Specifications

System Unit
Dimensions (HxWxD)
14.5 x 6.9 x 16.8 in (36.7 x 17.5 x 42.6 cm)
(with feet)
Weight (approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Input Requirements
Rated Line Voltage
(per power supply)
Rated Input Current
Rated Input Frequency
Rated Input Power
Power Supply Output
Rated Steady-State
(per power supply)
Power
Maximum Peak Power
System Inlet
Operating
Temperature
Non-operating
Relative Humidity
Operating
(non-condensing)
Non-operating
Altitude
Operating
Non-operating
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
DA - 12867 U.S. QuickSpecs — Version 25 — 9-28-2009
HP ProLiant ML110 Generation 5
39 lb (17.5 kg)
23.81 lb (10.8 kg)
90 to 132 VAC,
180 to 264 VAC
6 A (at 100 VAC),
3 A (at 200 VAC)
47 to 63 Hz
600 W (at 100 VAC),
600 W (at 200 VAC)
365 W (at 100 VAC),
365 W (at 200 VAC)
385 W (at 100 VAC),
385 W (at 200 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10% to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
5% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Page 25

Advertisement

Table of Contents
loading

Table of Contents