HP Integrity rx2660 Quickspecs page 18

QuickSpecs
Configuration
HP Integrity Trusted HP Integrity Trusted HP Integrity Trusted HP Integrity Trusted
Platform Module Platform Module Platform Module Platform Module
HP Integrity rx2660 Power HP Integrity rx2660 Power HP Integrity rx2660 Power HP Integrity rx2660 Power
Subsystem Subsystem Subsystem Subsystem
The rx2660 has an accessory option for an embedded security chip - the Trusted Platforms Module
(TPM) - product number AB404A. HP-UX Trusted Computing Services (HP-UX TCS) provides software
support for the TPM when running HP-UX 11i v2. By providing a low-cost embedded security chip option
(known as a Trusted Platform Module) in its zx2-based Integrity servers (rx2660, rx3600, and rx6600),
HP has established a foundation for strong protection of sensitive information - including cryptographic
keys. Built around industry standards, the Trusted Platform Module (TPM) provides a basis for key storage
by securely generating and storing cryptographic keys. HP-UX 11i TCS takes this a step further by
providing the necessary infrastructure for managing the TPM, as well as integrating it into select features
such as HP-UX Encrypted Volumes and File Systems (EVFS).
Using HP-UX TCS with EVFS:
Using HP-UX TCS to make the unattended boot capability of EVFS more secure is an important example
of how HP-UX TCS can be integrated with other applications to enhance security. For more information
see the "Protecting EVFS Keys with HP-UX TCS" chapter in the "HP-UX Trusted Computing Services
Administrators Guide" available in the HP-UX Trusted Computing Services section at:
http://docs.hp.com/en/internet.html
Please note that HP-UX 11iTCS requires:
(1) An HP zx2-based Integrity server (rx2660, rx3600, or rx6600) with a TPM installed, running HP-UX
11iv2 September 2006 release or later
(2) Installation of kernel patch PHKL_35428
To download TCS and EVFS, please see the HP-UX Software Depot web page at:
The HP Integrity rx2660 provides a high level of integrated power protection:
N+1 redundant hot swap power supplies
N+1 redundant AC power input protection with electrical phase isolation
Power monitoring and control
The HP Integrity rx2660 supports a second hot swap power supply for N+1 protection. One power
supply is shipped as a standard part of every system and is required for correct operation. The hot swap
design allows for the online replacement of a power supply when N+1=2 supplies are configured in the
server.
The HP Integrity rx2660 provides an independent power input receptacle for each power supply
(c13/C14 type). The independent design provides protection against losing the connection from a power
cord or breaker. The HP Integrity rx2660 power cords should always be plugged into separate breakers
whenever possible.
DA - 12698 Worldwide — Version 30 — April 13, 2012
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
http://software.hp.com
Page 18