HP Integrity rx2660 Quickspecs page 16

QuickSpecs
Configuration
Core I/O Core I/O Core I/O Core I/O
Integrity Integrated Lights ntegrity Integrated Lights
ntegrity Integrated Lights ntegrity Integrated Lights
Out Out Out Out (iLO2) Management Management Management Management
Processor Functionality Processor Functionality Processor Functionality Processor Functionality
Two 10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system
installation and wake on LAN capability
HP 8 Internal Port SAS (Serial Attach SCSI) Host Bus Adapter, supports up to 8 internal SAS disk
drives. Windows does not support the integrated SAS Host Bus Adapter. Windows customers must
select the optional HP 8 Port SAS Smart Array P400 RAID controller.
May select factory configured RAID. For HP-UX, OpenVMS, and Linux based systems, a maximum
of two RAID 1 volumes (2×2 HDDs) and a disk for global hotspare, for a maximum of five disks
in RAIDed arrays, is supported. The remaining three disks (of the maximum eight disks that are
supported) can be accessed normally, but not configured for RAID. The HP 8 Port SAS Smart Array
P400 RAID controller, supported in a PCI Express slot reserved for the RAID controller only,
supports RAID 1, 5 and 6. The RAID controller is required for all Windows based systems
(Windows does not support the integrated HP 8 Internal Port SAS host bus adapter), and is
optional for HP UX, OpenVMS, Linux based systems. The maximum of eight disks can be
configured for RAID 1, 5 and 6 in any combination. RAID 1 requires two identical HDDs, RAID5
requires three identical HDDs, and RAID 6 requires four identical HDDs. Factory configuration of
a RAID set is available.
Three USB 2.0 style A ports (USB 1.1 compatible); one front port, two rear ports
One general purpose serial ports; an additional serial port is available for the integrated iLO2
Management Processor
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Dedicated 10/100BaseTX LAN port for LAN console and embedded web console access
One RS 232 serial port for local console
Password protected console ports
Console mirroring between all local, modem, LAN, and web consoles
Remote power up and power down control
Configurable remote access control
Event notification to system console-Provides connectivity, information, and support for HP UX tools
(such as STM and EMS) to notify by email, pager and/or HP response centers.
Interface to system monitoring and diagnostic hardware via an internal IC bus
Secure Sockets Layer security on web console
Support for Integrity Integrated Lights Out (iLO2) Advanced Pack version 2 activation key and
license (AD301A). Firmware license installs on the integrated Processor Management Card.
Integrity Lights Out (iLO2) Advanced Pack provides additional remote management capabilities,
including LDAP directory services, Virtual Media (CD, DVD, and ISO impage) for HP-UX, Windows,
and Linux and Integrated Remote Console (Virtual Keyboard, Video, and Mouse) for Windows
The RN50 integrated chip provides basic graphic capabilities. One VGA port is supported, with
optional connection from front or rear of the system.
Supported resolutions and refresh rates include:
Operating System Operating System Minimum Operating System Operating System Minimum Minimum Minimum
Resolution Resolution Resolution Resolution
HP-UX 1024x768
Linux 1024x768
Windows 640x480
OpenVMS 640x480
DA - 12698 Worldwide — Version 30 — April 13, 2012
Refresh Rate Refresh Rate Refresh Rate Refresh Rate Maximum Maximum Maximum Maximum
Resolution Resolution Resolution Resolution
75 Hz 1920x1200
75 Hz 1920x1200
75 Hz 1600x1200
60 Hz 1920x1200
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
Refresh Rate Refresh Rate Refresh Rate Refresh Rate
75 Hz
75 Hz
75 Hz
75 Hz
Page 16