HP Integrity rx2660 Quickspecs page 11

QuickSpecs
Configuration
HP PCI-X 2 port 4 Gb Fibre Channel
and 2 port 1000Base T Adapter
HP PCIe 1-port 4Gb Fibre Channel
and 1-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
Additional Interface Cards Additional Interface Cards Additional Interface Cards Additional Interface Cards
PCI 8-port Serial MUX Adapter
PCI 64-port Serial MUX Adapter
16-port RS-232 RJ45 Port Module
16-port RS-232 DB25 Port Module
HP PCI Audio Card
HP 2D PCI-X graphics card
HP Integrity rx2660 Windows Server 2003 Supported I/O Cards HP Integrity rx2660 Windows Server 2003 Supported I/O Cards HP Integrity rx2660 Windows Server 2003 Supported I/O Cards HP Integrity rx2660 Windows Server 2003 Supported I/O Cards
NOTE: NOTE: NOTE: While ordering Windows Server 2008, do not mix differing brands of HBAs (Emulex and QLogic) within the same server NOTE:
configuration in an MPIO environment. This is to avoid issues which occur when different Fibre Channel HBAs are used within the
same server which support different I/O max transfer packet sizes in an MPIO environment. For example, the Emulex Fibre Channel
HBAs support a max I/O transfer packet size of 1MB and the QLogic Fibre Channel HBAs support a max I/O transfer packet size of
2MB. Mixing these two cards in an MPIO configuration can cause the system to hit a BSOD 0X000000D1 with a reference to
elxstor.sys
This applied to the following products: This applied to the following products: This applied to the following products: This applied to the following products:
Emulex: Emulex: Emulex: Emulex:
HP StorageWorks single port 8 Gigabit PCI-e FC Emulex HBA (AH402A)
HP StorageWorks dual port 8 Gigabit PCI-e FC Emulex HBA (AH403A)
HP StorageWorks 2 Gb Fibre Channel HBA (AB232A)
HP StorageWorks 2 Gb, 64-Bit/133 MHz PCI-X-to-Fibre Dual Channel HBA (AB466A)
HP StorageWorks 2 Gb, 64-Bit/133 MHz PCI-X-to-Fibre Single Channel HBA (AB467A)
HP StorageWorks 4 Gb Single Port 64-bit 266 MHz Fibre Channel HBA (AD167A)
HP StorageWorks 4 Gb Dual Port 64-bit 266 MHz Fibre Channel HBA (AD168A)
AD194A PCI-X
AD221A PCIe
AD222A PCIe
AD393A PCIe
AD278A PCI-X
AD279A PCI-X
AD280A PCI-X
AD281A PCI-X
AD317A PCI-X
AH391A PCI-X
DA - 12698 Worldwide — Version 30 — April 13, 2012
Yes (2) LC, (2)
RJ-45
Yes
Yes
Yes
No
No
No 4 per
AD279A
No 4 per
AD279A
No
No PCI-X only
backplane:
Combo
backplane:
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
3 -
2 HP-UX 11i v3 only
2 HP-UX 11i v3 only
2 HP-UX 11i v3 only
3
3
AD280A #001 Port
Module Power Supply,
required on Port Module
(3) and Port Module (4)
connected to an AD279A
64P MUX adapter.
AD281A #001 Port
Module Power Supply,
required on Port Module
(3) and Port Module (4)
connected to an AD279A
64P MUX adapter.
1 Factory Integration Only
AH391A offers 2D
graphics support. Support
2 available for HP UX v3
and v2
1
Page 11