HP Integrity rx2660 Quickspecs page 17

QuickSpecs
Configuration
System Console System Console System Console System Console
Configurations Configurations Configurations Configurations
Internal Disk and Media Internal Disk and Media Internal Disk and Media Internal Disk and Media
Drives Drives Drives Drives
The HP Integrity rx2660's integrated iLO2 Management Processor provides six methods for console
connections.
SSL secured Web console accessible through the 10/100Base T management LAN
Standard telnet connections accessible through the 10/100Base T management LAN
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
VGA graphics console. Keyboard and mouse connections are provided by USB. OpenVMS doesn't
support VGA console for boot operations, but supports VGA device for graphics use after boot.
Integrated Remote Console (virtual KVM) through the iLO 2 Advanced Pack (Windows systems
only).
The HP Integrity rx2660 supports up to eight internal Serial Attached SCSI (SAS) 2.5 inch hot plug
small form factor hard disk drives
An 8 internal port host bus adapter provides 8 ports, 1 port per SAS disk, for point to point
connection from the adapter to the disk. This means that each disk has its own 3 GB link.
Factory configured RAID is available. For HP-UX, OpenVMS, and Linux based systems, a
maximum of two RAID 1 volumes (2×2 HDDs) and a disk for global hot spare, for a maximum of
five disks in RAIDed arrays, is supported. The remaining three disks (of the maximum eight disks
that are supported) can be accessed normally, but not configured for RAID. The optional HP 8
Port SAS Smart Array P400 RAID controller, supported in a PCI Express slot reserved for the RAID
controller only, supports RAID 1, 5 and 6. The RAID controller is required for all Windows based
systems (Windows does not support the integrated HP 8 Internal Port SAS host bus adapter), and is
optional for HP-UX, OpenVMS, Linux based systems. The maximum of eight disks can be
configured for RAID 1, 5 and 6 in any combination. RAID 1 requires two identical HDDs, RAID5
requires three identical HDDs, and RAID 6 requires four identical HDDs. Factory configuration of
a RAID set is available. Please see rx2660 Ordering Guide for details.
Mirrordisk/UX is available for software mirroring on all HDDs in HP UX based systems, and HP
Volume Shadowing (software Raid 1) is available for all HDDs in OpenVMS-based systems.
Cables required to connect the internal disk drives to the host bus adapter are shipped with the
system; no need to order separately.
36-GB 15K, 72-GB 15K, 146-GB 10K, and 300GB 10K Serial Attached SCSI (SAS) disks are
supported. 300 GB 10K SAS disks will be supported in a future release (Q2 FY09).
Optical media drives include a DVD ROM (AD142A) and DVD+RW (AD120A).
DA - 12698 Worldwide — Version 30 — April 13, 2012
HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server HP Integrity rx2660 Server
Page 17